1/14 Yaroslav Gashek Passage,
Petropavlovsk
We produce F/F, F/W and EXT from birch roundwood in Petropavlovsk — for formwork, transport, furniture and export. We will select the thickness, grade and documents for your application.
Nord Panels combines the full production cycle, from roundwood harvesting to the finished product — veneer preparation, gluing, hot pressing, sanding and lamination on modern equipment. At every stage, moisture, geometry, bond strength between plies and surface quality are controlled — this allows us to consistently produce batches for construction, transport, furniture and export.
We do not offer a "universal panel for every case": concrete work requires smooth F/F, trailer floors need mesh-surfaced F/W, and furniture frames and finishing call for clean EXT. Tell us about your project — we will select the coating, grade and thickness.
F/F · Formwork
The smooth working surface and phenolic WBP binder make this line optimal for formwork, warehouse decking, racking floors and high-wear areas. The panel keeps its shape in humid conditions, withstands repeated use cycles and is suitable for demanding construction tasks.
F/W · Transport
One side remains smooth while the other has a textured anti-slip surface. This configuration is in demand for truck trailer floors, vehicle bodies, platforms, temporary decking, stages and production areas where grip and personnel safety matter.
EXT · Furniture
Birch plywood without a decorative coating — clean veneer for furniture, finishing, construction and industrial processing. The panel can be sanded, varnished or used as a base for subsequent lamination. Below are the characteristics of the main EXT grades by permissible defects and typical fields of application.
Logistics · B2B
Durable panels for wooden packaging, containers, pallet bases, temporary fencing and production tooling. We select grade III/IV and thickness based on cargo weight, storage conditions and logistics requirements.
Premium grade with a flawless appearance Grade E plywood is the highest-quality class, produced from carefully selected birch veneer. Sheet surfaces are virtually flawless, with no visible defects or manufacturing imperfections. Strict grading criteria: Permitted: Only barely perceptible natural variations in the wood grain; dark pin knots are excluded. Not permitted: Knots of any kind, including knot holes, wormholes, splits and brown streaks. Technical parameters and tolerances: Surface roughness (GOST 7016): Maximum 100 μm for sanded sheets and 200 μm for unsanded sheets. Flatness (warping): Not specified for sheets thinner than 6.5 mm. For thicknesses of 6.5 mm and above, maximum diagonal deflection is 15 mm per metre of length. Applications: The refined surface grain is ideal for clear lacquer finishes. This grade is used in aircraft and mechanical engineering, precision construction and as a substrate for film facing. In furniture production, it is intended for premium doors, tables, chairs and cabinets.
High-quality surface Grade B plywood has very few defects. A sheet may contain a total of no more than three machining defects or natural wood characteristics. Permitted variations: Knots and wormholes: Sound, tight knots, both light and dark, up to 15 mm in diameter. Partially intergrown or loose knots, through knot holes and wormholes up to 6 mm are permitted in a strictly limited quantity of no more than 3 per m². Splits and edges: Minor splits up to 200 mm long. Minor edge defects or veneer shortage within 2 mm may occur after trimming and sanding. Geometry: Slight sheet warping is permitted. Applications: Panels graded 1/1 are suitable for film facing and are widely used in furniture production, interior design and engineered wood flooring. Depending on the end-use requirements, WBP grades 2/2 and 3/3 may also be selected where their permitted surface characteristics are acceptable.
Balanced surface quality for finishing Grade BB plywood allows a moderate amount of natural wood features that can be corrected during finishing. Defects may be professionally repaired during production. Permitted variations: Sound knots: Tight, fully intergrown knots up to 25 mm in diameter — maximum 10 per m². Open and loose defects: Partially intergrown or loose knots, open knot holes and wormholes up to 6 mm in diameter — maximum 6 per m². Surface repair: Open defects and voids are repaired with matching natural veneer patches. Applications: The surface is suitable for painting, veneering or facing with other finishing materials. Panels graded 1/2 and 2/2 are widely used in furniture manufacture and interior partitioning. FC-bonded plywood grades 2/3, 3/3, 2/4 and 3/4 are also suitable for comparable construction and interior applications.
Structural grade for concealed construction and packaging Grade CP plywood is intended for applications where strength and economy are more important than surface appearance. Noticeable natural wood characteristics are permitted. Permitted variations: Sound knots: Tight, intergrown knots are permitted without a quantitative limit. Open defects and wormholes: Loose, partially intergrown or missing knots, open knot holes and wormholes up to 6 mm in diameter — maximum 10 per m². Applications: Suitable for concealed elements and internal structural components where appearance is not critical. Common uses include exterior construction, reusable formwork, temporary storage structures, utility buildings, and durable industrial packaging, cases and containers.
High-strength utility and packaging grade Grade C plywood is the most economical option, selected for technical performance rather than appearance. The essential requirements are sound ply bonding and structural integrity. Permitted variations: Visual defects: All natural and production-related surface imperfections are permitted. Knots and voids: Loose or missing knots, knot holes and wormholes are permitted without a quantitative limit, provided their diameter does not exceed 40 mm. Applications: Widely used for general construction. Grades 3/3, 3/4 and 4/4 are suitable for subfloor and wall sheathing, continuous roof decking and formwork. Grade 4/4 is also used for robust transport packaging, crates and containers.
| Manufacturer | Nord Panels, Petropavlovsk, Kazakhstan |
|---|---|
| Raw material | 100% birch roundwood |
| Product lines | Film Faced F/F · Wire Mesh F/W · Uncoated EXT |
| Binder | Phenol-formaldehyde / WBP adhesive |
| Coatings | Smooth film · anti-slip mesh · uncoated |
| Thickness | 6–40 mm, other values by agreement |
| Grades | E · I · II · III · IV; combinations 1/1, 1/2, 2/2, 3/4, 4/4 |
| Panel formats | 1220×2440 · 1250×2500 mm and others |
| Documents | CE Certificate · FSC Certificate · E05 Test Result · CARB |
| Supply | Kazakhstan · CIS · export to the EU and other destinations |
Standard and non-standard formats are discussed individually. For a calculation, specify the application, thickness, grade, coating and volume. Send a selection request →
F/F withstands contact with concrete, humid environments and repeated assembly and dismantling of formwork systems without losing its geometry.
F/W is used in the floors of trucks, trailers and platforms: the textured side reduces slipping while the birch core carries the load.
Decking, rack shelves, ramps and high-traffic work areas — the plywood withstands point and distributed loads.
EXT is suitable for frames, fronts, worktops, partitions and decorative elements with subsequent finishing.
Boxes, containers, spacers and bases for heavy equipment — we select the grade for visibility and strength.
We prepare the specification, certificate package and shipping parameters to meet the customer's requirements and customs clearance.
Our company is included in the register of domestic manufacturers. Official Nord Panels certificates: CE, FSC, DoP, ULEF, CARB, ISO 9001/14001/45001 and registration documents. Download the PDF for procurement, tenders or export shipment.
DoP for F/F film faced plywood (EN 636-3 S)
Download PDF
Confirmation of ultra-low formaldehyde emission (TSCA / CARB)
Download PDF
Occupational health and safety management system · ST RK ISO 45001-2019
Download PDF
Registration details of Nord Panels LLP · BIN 220540031489
Download PDFSpecify where the panel will be used, the required volume, thickness, grade and format. Our manager will suggest the optimal F/F, F/W or EXT line and calculate the delivery terms.
Contact us
